This is the G-Code generated by Jon's Makebore program that uses I J for the curves instead of R. Works like a charm when loaded and run with MACH3.
The attached screen shot shows that LinuxCNC chokes on this. Suggestions as to why? N10 G01 F10.000 X1.0000 Y2.0000 N20 F1.667 Z-0.0500 N30 F10.000 X1.0125 N40 G03 X1.0000 Y2.0125 I-0.0250 N50 X0.9750 Y2.0000 J-0.0375 N60 X1.0000 Y1.9625 I0.0500 N70 X1.0500 Y2.0000 J0.0625 N80 X1.0000 Y2.0625 I-0.0750 N90 X0.9250 Y2.0000 J-0.0875 N100 X1.0000 Y1.9125 I0.1000 John
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
