Try this driver, not bad for $5. Good documentation too. (They make bigger ones too. I'm using some 15 amp drivers that are like these.) https://www.pololu.com/product/2960
On Tue, Oct 22, 2019 at 4:49 PM Chris Albertson <[email protected]> wrote: > Yes. Agree except not an ACTUAL 298. Get a modern replacement for > the 298. They are MOCH better in every way. Notice so many of the > titles on eBay say "replaces L298". Go for one of those. > > On Tue, Oct 22, 2019 at 4:34 PM Thaddeus Waldner <[email protected]> > wrote: > > > > I think the cheap 298 devices on eBay would work for you. They are > 2-channel h-bridge. They actually have 6 inputs; forward, reverse, and > enable for each channel. They will turn a motor from a single PWM signal, > either via the enable input with one direction pin high, one low, or via a > direction input with enable high and opposite direction low. > > > Chris Albertson > Redondo Beach, California > -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
