Haha thanks Sam! On Thu, Apr 9, 2020, 9:51 AM Sam Sokolik <samco...@gmail.com> wrote:
> Yay!!! > > > On Wed, Apr 8, 2020, 4:32 PM andrew beck <andrewbeck0...@gmail.com> wrote: > > > hi guys if anyone wants to connect a external e stop with linuxcnc and > have > > it all connected up properly, I finally worked it out and made a video of > > the process. > > > > my E stop video showing the whole process from start to finish (its long > > and boring but should help people who are stuck lol) > > <https://www.youtube.com/watch?v=rBeX-bVDkJw> > > > > Hopefully people can follow this video. there are only 2 changes in the > Hal > > file required from the stock step of pncconf configuration and 2 DPDT > > relays to connect the external circuit together and link everything > > together as I wanted > > > > Thanks so much to everyone here that helps me so much it is much > > appreciated. > > > > and thanks to Sam for his awesome Estop video that helped me so much. > > sam's E stop video if you are interested. > > <https://www.youtube.com/watch?v=hVkNtq4C1F8&t=3s> > > regards > > andrew > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
