Already cut cable and thrown away the old control box. Measured 38ohm, decided to try 24 volt, got about 1A current, a small clonking sound and then rotating chuck is was connected to motor.
> My lathe internally provides 24 V DC for these clutches at about 1.5 > Ampere each. Try measuring the voltages in the electric cabinet. > > Peter > > Am 12.04.2020 um 20:48 schrieb N: > >> On Sun, 12 Apr 2020 at 16:09, N <[email protected]> wrote: > >> > >>> There some kind of electrical connection. Anybody have any idea if it is > >>> common to have some kind of clutch for spindle? > >> Yes. My lathe, for example, has a 2-speed gearbox that contains two > >> electromagnetic clutches and an electromagnetic brake. > > This one is a CNC machine. There is some kind of electrical connection but > > to tell what kind of signal is needed is not obvious, maybe with some luck > > I did not remove cable in other end. _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
