On Wed, 6 May 2020, Leonardo Marsaglia wrote:
Date: Wed, 6 May 2020 11:59:28 -0300 From: Leonardo Marsaglia <ldmarsag...@gmail.com> Reply-To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Mesa 7i73 keypad question/issueWell, the voltages seem to be ok.
Can you duplicate what I did with halcmd (and 7I73 J1 unconnected) and post the results here?
halcmd -fk halcmd: loadrt matrix_kb config=8x8 halcmd: addf matrix_kb.0 servo-thread halcmd: net char hm2_[your_card].0.7i73.0.[your_chan].keycode matrix_kb.0.keycode halcmd: show pin matrix_kb.0 El mi??., 6 may. 2020 a las 11:04, Peter C. Wallace (<p...@mesanet.com>) escribi??:
On Wed, 6 May 2020, Leonardo Marsaglia wrote: > Date: Wed, 6 May 2020 10:53:07 -0300 > From: Leonardo Marsaglia <ldmarsag...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > Subject: Re: [Emc-users] Mesa 7i73 keypad question/issue > > Well, with the test component I made to show the codes I can see the codes >varying from 192 thru 240 or something like that. I find strange anyway that at >startup I have a code being shown just like if a key is pressed but without >connecting the cable to the 7i73. > >I'm doubting about flashing the board or not to see if something changes. I >now I have the latest firmware but, could It be corrupted or something? Its not likely that flashing would make any difference It might be that an I/O pin has been damaged somehow you might verify (with a voltmeter) that all the KB input pins are high when idle (KEY 8..15 should be high when unconnected) El mi????., 6 may. 2020 a las 9:59, andy pugh (<bodge...@gmail.com>) escribi????: > On Wed, 6 May 2020 at 13:49, Leonardo Marsaglia <ldmarsag...@gmail.com> > wrote: > > > Indeed, I double checked that but the only params I've got are > > matrix_kb.0.tmax and matrix_kb.0.tmax-increased. > > Ah, yes, the scan-related pins / params only exist when matrix_kb is > configured to actually perform the keyboard scanning. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > ???? George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination.
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
