Hello Peter, Sorry for the late reply. Today I executed the commands as you did and it worked perfectly. All keys showed false and now the keyboard is working fine.
I really don't know what could've been. Probably my head not working ok because I'm still trying to get my sleep right after all these days of quarantine.. El mié., 6 may. 2020 a las 12:18, Peter C. Wallace (<p...@mesanet.com>) escribió: > On Wed, 6 May 2020, Leonardo Marsaglia wrote: > > > Date: Wed, 6 May 2020 11:59:28 -0300 > > From: Leonardo Marsaglia <ldmarsag...@gmail.com> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > > > Subject: Re: [Emc-users] Mesa 7i73 keypad question/issue > > > > Well, the voltages seem to be ok. > > Can you duplicate what I did with halcmd (and 7I73 J1 unconnected) and > post the > results here? > > > halcmd -fk > halcmd: loadrt matrix_kb config=8x8 > halcmd: addf matrix_kb.0 servo-thread > halcmd: net char hm2_[your_card].0.7i73.0.[your_chan].keycode > matrix_kb.0.keycode > halcmd: show pin matrix_kb.0 > > > > El miÿÿ., 6 may. 2020 a las 11:04, Peter C. Wallace (<p...@mesanet.com>) > escribiÿÿ: > > > On Wed, 6 May 2020, Leonardo Marsaglia wrote: > > > > > Date: Wed, 6 May 2020 10:53:07 -0300 > > > From: Leonardo Marsaglia <ldmarsag...@gmail.com> > > > Reply-To: "Enhanced Machine Controller (EMC)" > > > <emc-users@lists.sourceforge.net> > > > To: "Enhanced Machine Controller (EMC)" < > emc-users@lists.sourceforge.net > > > > > > Subject: Re: [Emc-users] Mesa 7i73 keypad question/issue > > > > > > Well, with the test component I made to show the codes I can see the > > codes > > >varying from 192 thru 240 or something like that. I find strange anyway > > that at > > >startup I have a code being shown just like if a key is pressed but > > without > > >connecting the cable to the 7i73. > > > > > >I'm doubting about flashing the board or not to see if something > changes. > > I > > >now I have the latest firmware but, could It be corrupted or something? > > > > Its not likely that flashing would make any difference > > > > It might be that an I/O pin has been damaged somehow > > > > you might verify (with a voltmeter) that all the KB input pins > > are high when idle (KEY 8..15 should be high when unconnected) > > > > > > El miÿÿÿÿ., 6 may. 2020 a las 9:59, andy pugh (<bodge...@gmail.com>) > > escribiÿÿÿÿ: > > > > > On Wed, 6 May 2020 at 13:49, Leonardo Marsaglia <ldmarsag...@gmail.com > > > > > wrote: > > > > > > > Indeed, I double checked that but the only params I've got are > > > > matrix_kb.0.tmax and matrix_kb.0.tmax-increased. > > > > > > Ah, yes, the scan-related pins / params only exist when matrix_kb is > > > configured to actually perform the keyboard scanning. > > > > > > -- > > > atp > > > "A motorcycle is a bicycle with a pandemonium attachment and is > > > designed for the especial use of mechanical geniuses, daredevils and > > > lunatics." > > > ÿÿÿÿ George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > Peter Wallace > > Mesa Electronics > > > > (\__/) > > (='.'=) This is Bunny. Copy and paste bunny into your > > (")_(") signature to help him gain world domination. > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > Peter Wallace > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
