It's fairly robust. Like a Grizzly G3616. http://www.autoartisans.com/mill/Mill_CNC
But it's got a poor excuse for an ACME feed not on the X axis with about 0.024" backlash. Climb milling in the X direction with slow RPM and a large cutter causes the table to shake. So once the spindle speed control system is in place the whole thing is coming apart for a ball screw retrofit. And belt guards and covers etc. So with the current backlash it may not be robust enough for round cutters. John > -----Original Message----- > From: dave engvall [mailto:dengv...@charter.net] > Sent: May-21-20 7:04 AM > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Face Milling > > Round inserts are nice if you have the power and stiffness to use them. > Only in desperation would I use a fly cutter simple because of the > unbalanced load. > Because of their radius the round inserts will give a nice finish. > Have fun. > > Dave > > On 5/20/20 9:56 PM, John Dammeyer wrote: > > I've been surfacing a casting that is larger than my machine envelope. > > Not only that although pattern was 5/8" thick MDF the > casting ended up with thicker and thinner parts. With it shimmed and moving > clamps around I managed to flatten the bottom and > then clamp it down and surface the top. But it took a long time. > > > > I found LinuxCNC easy enough to use for this. Just kept resetting x or y > > home and restarting the G_code. > > > > Anyone used one of these? > > https://www.aliexpress.com/item/4000890081459.html > > > > Or with the round carbide inserts > > https://www.aliexpress.com/item/32952847637.html > > > > Alternatively since I use the Tormach Tooling at a much higher price there > > is this flycutter. > > https://tormach.com/tts-superfly-cutter-kit-33031.html > > > > John > > > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users