On Thu, 28 May 2020 at 17:17, Gene Heskett <ghesk...@shentel.net> wrote:
> 5; using new printer, make a 2 step pulley with recesses for a pair of > ball bearings to turn on #4. Tooth count of larger step of this pulley > so it clears the mills table,(and possibly the worm shaft) but will need > an offset outward to clear flange of worm shaft, about 5/16" IIRC. Motor > mount offset to align belt. The pulleys coaxial with the rotation is a neat idea. But how much gear-own do you need? I ran my BS0 with direct drive and a tiny little servo (1Nm?) and it was pretty much OK. You might find that 15T on the motor shaft does not leave you enough hub to figure out a mounting method. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
