After doing that one, i took the right post slider loose and loosened its fit on the vertical, as I noted there were Z movements that weren't making to the other end of the bar.
And raised the tension in the x belt which turned out to be slack enough it was just laying on the right end idler pulley. But before I try another 10 hour print, I'd like to see an improved much better filled tooth profile, my guess is that its 10% or less, no high strength fill behind what might be called teeth. I'd like to see a 100% fill for at least 4mm behind the teeth, but cura isn't doing any of that. Those teeth are 100% crushable all the way to the bore reinforcement. And I can't make the 2 part either, this pulley code won't render if the shaft is >9.9mm. Question already posted on that. Thanks folks. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
