On Saturday 06 June 2020 15:16:21 Chris Albertson wrote: > Looking at that *.3mf file I can see the cause of the problem, > There are 39 non-default settings but the big problem is near the top. > See the screenshot below. > > The "line width" is set to 0.3 and there is a 0.4 nozzle on the > printer. This is a perfect way to simulate the effect of a clogged-up > nozzle. > > Also this part does NOT need a "super quality" layer hight. All the > lines are vertical so a small z-axis step does nothing. Try setting > this to about 0.2 and get a faster print. > > This has to be the problem. I thought about actually printing this > to see if I can duplicate the failed print. But I think the cause is > obvious now > > [image: Genes3mf.jpeg] > > On Sat, Jun 6, 2020 at 11:53 AM Thaddeus Waldner <thadw...@gmail.com> wrote: > > Correction: > > "lathe-stf/“ > > Full address: > > http://geneslinuxbox.net:6309/gene/lathe-stf/ > > > > > The server is being a cast iron bitch, instant reject notices even > > > when its smaller than the 360k stated limit. So its in the usual > > > place, click on the link in my sig, and when you see our now old > > > pix, add "lathe.stf/" to the address bar, and its the only CE3PRO > > > file there.
So I resliced it at the suggested changes, and while it still laying down the raft, its a considerably more substantial raft than before. Will be interesting as it claims about 3 something hours, faster than it took to do the 8 hour job you've looked at. It seems to me off to a decent if not flying start, I fed the missus too, so I think I'll check my eyelids for leaks while its creeping along. 2 hours later its at 40% and looking much more solid and usable. Thanks for the help everybody. I found some 2.25" alu to make its hub from. It will be a race to see which gets here first, a real sprocket or rest of the makings for this. Then it will be back to motorizing the BS-1 clone. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
