Something is fundamentally wrong. The error in the print swamps the 3mm pitch teeth. The print as errors that are literally 10x greater than they should be. Your printer should be making parts with less than 0.2 or 0.1 mm (0.010 to 0.005 inch) deviation from the design.
*Can you show us all the settings you used in Cura? Ether take a screenshot or do a "file--> Save" and post the resulting *.3MF file. * It does not even make sense to measure that 5mm cube test block if the surface quality is this poor. It is REALLY hard to guess what the problem is without seeing the exact settings. I could ask you what you did, but there is a good chance what you think you did is not what actually was done. I doubt the printer is broken. On Sat, Jun 6, 2020 at 9:56 AM Gene Heskett <ghesk...@shentel.net> wrote: > On Saturday 06 June 2020 10:15:48 Andrew wrote: > > > сб, 6 черв. 2020 о 17:03 Gene Heskett <ghesk...@shentel.net> пише: > > > Got it made, took all night, but I can see right thru the pulley > > > cogs. Its all infill at 50% or less. How the heck do I convince cura > > > to make solid teeth? > > > > > > Gene, can you give us a photo? Maybe upload somewhere and post a > > > link > > Here ya go Andrew. A bit fuzzier on the far side, compresses better Had > a hell of a time, camera decided its autofocus didn't work after fresh > batteries. > > > WBR, > > Andrew > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > Genes Web page <http://geneslinuxbox.net:6309/gene> > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users