> -----Original Message----- > From: Martin Dobbins [mailto:tu...@hotmail.com] > Sent: Sunday, June 28, 2020 4:48 PM > To: Enhanced Machine Controller (EMC) > Subject: [Emc-users] Freecad > > Since the recent discussion about freecad, when I mentioned I am running a > <slightly> older version from Appimage with some niggly issues, I have come > to realize that the development version of freecad is available from here: > > https://wiki.freecadweb.org/AppImage > > It is quite possible to run more than one version of the Appimage and I have > now downloaded 0.19-21775. > > I have yet to try this to compare with the existing. > > Martin
I hesitate to spend time installing and learning FreeCAD only to find that it is not useful. Can anyone provide an assessment of the capabilities of the gcode produced? For example, does it implement only the most basic 2.5D toolpaths or are helical entry, canned cycles, peck drilling, HSM toolpaths, etc available? _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
