Hi
What is this syntax:
G0 @32.4 ^0
Regards,
Cristian Bontas
On 7/11/2020 18:28, andy pugh wrote:
On Sat, 11 Jul 2020 at 16:11, Gene Heskett <[email protected]> wrote:
I need to drill 6 holes in the face of a nema-23 adapter I'm making for a
bigger 100/1 worm drive. That bolt circle is nominally 64.8mm in
diameter so i feed arcgenm18,py 0,0,64.8,0,60 and click show me. The
first line of the answer is the offset, driving the machine to the
center of the first hole at 3 oclock on the circle.
There is no need for this level of complication to spiral down full circles.
; relative are centres
G91.1
; Go to first hole centre point
G0 @32.4 ^0
; offset to required radius
G91
G0 X1.1
G90
;Touch the top
G0 Z0.5
G1 F100 Z0
; Spiral down 4 mm in 8 turns
G2 Z-4 P8 I-1.1
; finish out the bottom.
G2 Z-4 I-1.1
; and next
G0 Z 10
G0 @32.4 ^30
...
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
