On Tuesday 28 July 2020 12:34:33 Martin Dobbins wrote: > Freecad newbie, and I'd like to get a printout of the parts list in > this .step file. The list it shows in the upper left panel. > > This is version 16, is it possible, and if so how? > > Hi Gene, > > Just tried to reply to you because I tried this out with version 19. > I'm a newbie on Freecad too, so I followed this video: > > https://www.youtube.com/watch?v=REEG7MAqlMw > Thats A windows, an B 18-pre. I have 18 here, but not the supporting python stuff without updateing to buster, I'm still on stretch. And I'm not going out to get a new drive for a buster install with this damned virus on the loose. I do have some 240GB SSD's which ought to be good enough, but I'm also waiting for the Linuxcnc folks to spin up a buster installer and AIUI, its the RTAI for a later kernel than 3.20 that is the holdup. So I'm stuck on stretch and freecad 16 ATM.
> I tried to attach the resulting Freecad file for you to open but it > exceeded posting limits (it's a 2mb file), so it's stuck in > moderation. Where it will expire from lack of oxygen. :) > If it doesn't make it through, I can probably come up with a listed > BOM, if that's what you are after? > Yes, so I can order enough screws to assemble at least 3 of these once I do some size trimming to make it better, both the flexgear, and the driving bearing carrier need scaled up a couple percent to optimize the engagement. At these qty's, I may as well order boxes of the common types. All allen head cap style. from greping it looks like 4 ea M3x10 screws per unit, are nema-17 motor mounts, needs M3 nuts on inside, but are not listed, nor shown when taken apart by freecad. ??? self-threading in the plastic? 14 ea M4x10 screws per unit 2 ea M4x15 screws per unit 6 ea M4x25 screws per unit 18 ea M4_NUT's per unit 2 ea SQ_NUT_M4 per unit I think that covers it. Thanks for the push Martin. > Martin Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
