I see why I had trouble. It was easier that I emagined! Thank you Andy!
--J. Ray Mitchell Jr. jrmitche...@gmail.com (818)324-7573 "Good enough is the enemy of excellence"author unknown On Sun, Aug 16, 2020 at 12:47 PM andy pugh <bodge...@gmail.com> wrote: > On Sun, 16 Aug 2020 at 20:41, jrmitchellj <jrmitche...@gmail.com> wrote: > > > > Has something changed in Master with the process of setting tool length > > offsets? > > A long time ago... > > Assuming the Axis GUI there are now two buttons, one to touch off the > coordinate system and one to touch off the tool. > (Because it was so easy to forget to select "tool table" in the drop-down) > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users