On Friday 21 August 2020 15:35:26 Gene Heskett wrote: > On Friday 21 August 2020 12:45:11 Chris Albertson wrote:
> Checking just now, its up to a > step over a mm up, the brim looks pretty gossamer, but the higher > stuff doesn't look like its starving, just on a diet. Might have a > usable part. Later, its looking like a good part about 1/2 done. > > It only took a 5 minute run to break the flexgear I'd made out of > white PLA with the old hotend, and the next one I made about .1% > smaller, had enough elephants foot I'll never make it work. I got that one fixed, took it to the lathe. Sharpened up a cutoff blade and gave it a cheap shave. Now I'm building the bigger piece of the wave gear bearing carrier, and feel I finally have enough plastic. st/mm is now 250, and flow is at 150% and its not looking too shabby. I should flag the fiber, and check the delivery for a 100mm push at some point, but don't know how without removing the nozzle, and convincing Merlin to move it cold, which it will not do. There's now about 1.5" between the fiber drive and the nozzle. 3.5 cm maybe. The mail has come, > And the tpu still hasn't appeared. Shoulda been here on the 17th. > Story of life in rural WV, hurry up so you can wait longer. :( > > Thanks Chris. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
