On Mon, 14 Sep 2020 at 04:38, Scott Harwell via Emc-users
<emc-users@lists.sourceforge.net> wrote:
>
>  I found this it might help.
> Scott
> Rapid Rotary

Along the same lines, there is a filter file here that automatically
converts XY UV G-code to G93 based on which end is bigger.
https://forum.linuxcnc.org/38-general-linuxcnc-questions/35141-a-head-scratcher-for-me?start=10#120524

The only reason I mention this is that it runs automatically as the
G-code file is opened, rather than being a separate application.
(And, to be fair, this isn't an option for RapidRotary as it needs to
be able to query the working radius)

-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912


_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to