I am trying to configure my 5i25/7i76 for my CNC Lathe. I had a working configuration for 2.7.x but I may have lost it in our move from Oregon to Iowa. I took what I thought was the working configuration, I probably made a mistake. I upgraded to 2.8 without verifying the configuration.
I ran pcnconf on the configuration and now I am getting the following error when I try to start it up. Debug file information: Note: Using POSIX realtime ./my_LinuxCNC_lathe.hal:38: Pin 'hm2_5i25.0.7i76.0.0.output-00' does not exist Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.0 Machine configuration directory is '/home/acondit/linuxcnc/configs/myCNCLathe' Machine configuration file is 'myCNCLathe.ini' INIFILE=/home/acondit/linuxcnc/configs/myCNCLathe/myCNCLathe.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XZ KINEMATICS=trivkins coordinates=XZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./myCNCLathe.hal Shutting down and cleaning up LinuxCNC... Running HAL shutdown script hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i25 at 0000:03:02.0 hm2/hm2_5i25.0: Smart Serial Firmware Version 43 hm2/hm2_5i25.0: 34 I/O Pins used: hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) hm2/hm2_5i25.0: IO Pin 006 (P3-04): IOPort hm2/hm2_5i25.0: IO Pin 007 (P3-17): IOPort hm2/hm2_5i25.0: IO Pin 008 (P3-05): IOPort hm2/hm2_5i25.0: IO Pin 009 (P3-06): IOPort hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort hm2/hm2_5i25.0: registered hm2_5i25.0: initialized AnyIO board at 0000:03:02.0 hm2_5i25.0: dropping AnyIO board at 0000:03:02.0 hm2/hm2_5i25.0: unregistered hm2_pci: driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime ./myCNCLathe.hal:38: Pin 'hm2_5i25.0.7i76.0.0.output-00' does not exist 3109 Stopping realtime threads Unloading hal components RTAPI_PCI: Unmapped 65536 bytes at 0x7f75bc6b4000 Note: Using POSIX realtime I tried to attach my pncconf file but it was too large. Thanks, Alan _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
