On Fri, 9 Oct 2020 at 20:12, Alan Condit <condit.a...@gmail.com> wrote:
> I am trying to configure my 5i25/7i76 for my CNC Lathe. I had a working > configuration for 2.7.x but I may have lost it in our move from Oregon to > Iowa. I took what I thought was the working configuration, I probably made a > mistake. I upgraded to 2.8 without verifying the configuration. > > I ran pcnconf on the configuration and now I am getting the following error > when I try to start it up. If you still have the old config files then they should still work. (LinuxCNC will make the required modifications to the INI and HAL automatically[1]) [1] Has anyone heard any stories of that script not working? I was expecting a rash of failures and error reports. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users