On Fri, 16 Oct 2020, Gene Heskett wrote:
Date: Fri, 16 Oct 2020 15:49:17 -0400
From: Gene Heskett <[email protected]>
Reply-To: "Enhanced Machine Controller (EMC)"
<[email protected]>
To: "'Enhanced Machine Controller (EMC)'" <[email protected]>
Subject: [Emc-users] For Peter
I went out to clear the input pins I'd need for the 2nd encoder I was
going to use with the BS-1 clone.
Somewhere the mirror got broken but without any smoke.
At lcnc launch, it complained that the first 3 field input "-nots" did
not exist, so they got their net lines commented out. They corresponded
to the first 3 axis's home switches, so it runs with those lines
commented out.
But, they exist in the halmeter menu once its running, AND NO field input
on the 7i76, at least of the 16-31 assignment on the 7i76D's TB5,
registers an applied logic high of 5.11 volts. Do I have to convert all
the field input tally's to supply the field voltage of 12 volts to an
input before they see a true?
7I76 inputs need > 60% of field voltage to register high
and < 40% of field voltage to register low
Or do I have an even bigger problem?
??
Thanks Peter.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
