On 11/1/20 8:18 AM, andy pugh wrote:
On Sun, 1 Nov 2020 at 16:02, dave engvall <dengv...@charter.net> wrote:
I have a application for a 7i37/ 7i33. In face a couple of them.
First try has been a D525 with a SIIG single pport.
Do you really mean 7i37? Or maybe 7i43?
First off I have no idea if the SIIG board works and indeed no idea of
how to test it.
If it shows up in lspci as a parallel port card that's a good start.
Does it have a Moschip chip? Those generally work.
Exactly which card do you have?
Card list:
SIIG 1 port cyber8000 chip lspci reports 1 port bios says EPP
IT 8875 lspci reports 1 serial |
pport bios set to EPP
LAVA lspci reports dual pport
controller A I didn't check bios
Timedia lspci reports dual IEEE1284
discussion on forum seems to say Windoze only
all of these cards except IT have fpga's.
Do I need to flash the 7i37 and then try to load the hm2-servo"
Still rather unsure about next step(s).
Upward and onward .... maybe. ;-)
Dave
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
