7i37 is a daughter card and can't be flashed.
On Sun, Nov 1, 2020 at 3:03 PM dave engvall <dengv...@charter.net> wrote: > > > On 11/1/20 8:18 AM, andy pugh wrote: > > On Sun, 1 Nov 2020 at 16:02, dave engvall <dengv...@charter.net> wrote: > > > >> I have a application for a 7i37/ 7i33. In face a couple of them. > >> First try has been a D525 with a SIIG single pport. > > Do you really mean 7i37? Or maybe 7i43? > > > >> First off I have no idea if the SIIG board works and indeed no idea of > >> how to test it. > > If it shows up in lspci as a parallel port card that's a good start. > > > > Does it have a Moschip chip? Those generally work. > > > > Exactly which card do you have? > > > Card list: > SIIG 1 port cyber8000 chip lspci reports 1 port bios says EPP > IT 8875 lspci reports 1 serial | > pport bios set to EPP > LAVA lspci reports dual pport > controller A I didn't check bios > Timedia lspci reports dual IEEE1284 > discussion on forum seems to say Windoze only > > all of these cards except IT have fpga's. > Do I need to flash the 7i37 and then try to load the hm2-servo" > Still rather unsure about next step(s). > > Upward and onward .... maybe. ;-) > > Dave > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users