> What role does the USB port play? Provides 5V from the PC side for the isolated connectors. That's pretty standard in a lot of BoBs. The outputs aren't isolated but they expect the motor drives to have optical isolation. It's only the inputs that are powered from the PC side. It's all pretty convoluted. Often you can add a jumper that carries the 5V from the control side to the PC side. I have a non-Chinese one that is quite similar that I used with the BeagleBone and MachineKit when I was first playing around with the CNC on this mill.
> On Wed, Nov 25, 2020 at 12:16 AM John Dammeyer <jo...@autoartisans.com> > wrote: > > > Hey how about that. I have one of those too. Never even realized it had > > a 0-10V out. My plan was to connect it to the second P Port on the MESA > > 7i92H. I guess I should get back to that project and try it out. I'll > > report the results when I'm done. > > > > John Dammeyer _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
