On Wed, 20 Jan 2021, Ralph Stirling wrote:
Date: Wed, 20 Jan 2021 22:27:34 +0000
From: Ralph Stirling <ralph.stirl...@wallawalla.edu>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] Another Mesa vhdl question
I've tried it both ways, and while the pulse train
moves to the other trace, I get no more response.
-- Ralph
Well its neccesary for FPGA TX --> uC RX and uC TX --> FPGA RX
but clearly not sufficient. Are you sure the uC baud rate is correct?
________________________________________
From: Peter C. Wallace [p...@mesanet.com]
Sent: Wednesday, January 20, 2021 2:15 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Another Mesa vhdl question
Looks like you have RX connected to RX and TX to TX
you need RX to TX and TX to RX
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=04%7C01%7Cralph.stirling%40wallawalla.edu%7C0e7d00f65ecf41153a6008d8bd90fffa%7Cd958f048e43142779c8debfb75e7aa64%7C0%7C0%7C637467777766597506%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=D%2FZGjx23N2UME8DmtbJiSfE1D%2F%2FL7ejXyuici0XXkPs%3D&reserved=0
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
