Hello Lloyd, Did you set any input on the *axis.L.eoffset-scale *pin? May that's what you're missing.
El mié, 10 mar 2021 a las 13:53, lloyd wilson (<llwilso...@rochester.rr.com>) escribió: > I'm having trouble getting the new 2.8 external offset functionality to > play nicely. Most of the (known) steps are working (as observed in the > hal watch screen): > > - axis.a.eoffset-enable is set true. > > - inputs (step up & down) generate appropriate values in > axis.a.eoffset-counts > > - offset counts generate an (at least for first approximation) > appropriate value in axis.a.eoffset-request > > - but the requested value never shows in axis.a.eoffset > > OFFSET_AV_RATIO is set to 0.5 (just a swag for now). > > other configuration values for this axis are cribbed directly from the > generic stepper example. The stepper motor responds appropriately to jog > commands. > > I'm sure there is a (blindingly obvious) step I'm missing, can somebody > aim me in the right direction? > > as always, thanks > > lloyd > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
