Dave, It sure sounds like you are failing at the first step, you shouldn't have to dd, and it's probably not going to work. You don't have a linux computer? Eric
On Wed, Apr 7, 2021 at 11:15 AM dave engvall <dengv...@charter.net> wrote: > Confusion reigns! > The idea is to use the pi to drive a 7i90->7i33 > I just tried the link John recommended .. 2.8.1 with the same result so > it looks like I need to shift gears. > I'm lost; I just need a version that will run linuxcnc with servos. > Agnostic about which version. > If raspianos with uspace(?) will do that I'm happy. I just need > something to WORK. ;-) > With some pain I can use my wife's Mac and the rpi-tools to get an > image on to the SD. > Wandering in the wilderness. > > Dave > > > On 4/7/21 7:31 AM, andy pugh wrote: > > On Wed, 7 Apr 2021 at 15:25, dave engvall <dengv...@charter.net> wrote: > >> Image is one at top of page. buster 4 G > >> https://raspi.debian.net/tested-images/ > > Do you actually want to run LinuxCNC on the Pi? > > > > Why are you using the Debian image rather than the official Raspbian > > one, or the LinuxCNC one. > > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
