> From: andy pugh [mailto:bodge...@gmail.com] > On Tue, 29 Jun 2021 at 04:14, John Dammeyer <jo...@autoartisans.com> wrote: > > > > At the risk of being banned I'd suggest that this one point is a bit > > extreme: > > > > "Excessive or unwelcome helping; answering outside the scope of the > > question asked" > > It does seem a little odd. I suspect it is aimed at some manner of > behaviour that I have not (knowingly) seen on our forums. > It is a bit of a concern to think that I could be accused of breaking > the CoC for being too helpful. > > I get the feeling that this CoC was written for a somewhat different > demographic than LinuxCNC users tend to be. (By which I am mainly > referring to age) . > > -- > atp
I would hope we're also attracting younger people who are interested in controlling machines; be they robots, mills, lathes or simple pick and place machinery. I'm not even sure that a code of conduct is even needed on these forums. I've been managing the E-Leadscrew forum for more than 10 years. I've found that just as the book Humankind https://www.littlebrown.com/titles/rutger-bregman/humankind/9780316418553/ states that people are fundamentally and basically kind, so we've really never had issues on that forum. Dynamic discussions sometimes but name calling and abuse isn't allowed. We haven't needed a CoC. Nor even off topic subjects as there are other forums for that. For this forum I'd rather learn how I can attach a CANUSB to LCNC and send/receive CANopen messages with the SocketCAN interface. Not about CoC. So my goal, other than trying to figure out how to mount sensors so I can get spindle feedback is Controller Area Network oriented. To get there I'll probably have to get my Hohman Designs ModIO working since there was an attempt with LCNC for it. But I think it just sort of dribbled away. But by working with ModBus I'll learn more and eventually be able to create CANopen stuff. I have a lot of CAN experience. Very little LCNC experience. John Dammeyer _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users