Oh, thank you for pointing that out, I definitely had missed that! I have absolutely no experience with canned cycles so far, always managed simply with G1, G2 and G3 Is there a way to reverse the direction? I tried playing with Z and R values, but got only error message that R has to be larger than Z.
The machine I am dealing with is Biesse and it has drill units exactly like in the picture here: https://forum.linuxcnc.org/20-g-code/29162-horizontal-drilling-using-g81 2 drill bits facing opposite directions. Each of them would be defined as separate tool with different tool length offsets along X and Y. But currently it seems to me that there is no way to create a canned cycle to use each one of them. Or am I missing something? Viesturs pirmd., 2021. g. 6. sept., plkst. 22:58 — lietotājs Chris Radek (<ch...@timeguy.com>) rakstīja: > > Canned cycles work in all six planes, XY YZ ZX UV VW WU > > http://linuxcnc.org/docs/2.8/html/gcode/g-code.html#gcode:g80-g89 > > On Mon, Sep 06, 2021 at 07:44:42AM +0100, Andy Pugh wrote: > > > > I think that both can work, actually. Probably worth experimenting in a sim. > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
