On Fri, 2022-01-28 at 08:27 -0500, gene heskett wrote: > On Friday, January 28, 2022 5:13:33 AM EST Valerio Bellizzomi wrote: > > Attached are my .ini and .hal files. > > Can you tell me what is missing there? > > > > On Thu, 2022-01-27 at 12:39 -0500, gene heskett wrote: > > > On Thursday, January 27, 2022 11:49:17 AM EST Valerio Bellizzomi > > > > > > wrote: > > > > Do I have to somehow convert my configurations for master ? > > > > > > IDK about your axis gui errors, but one thing I note is that you > > > don't > > > have a numerical spindle number. master had grown the ability to > > > control > > > more than one spindle some time back, and the S argument now > > > expects > > > a > > > following number before the speed of the numerical assignment of > > > the > > > spindle number. All my machines only have one, they start at base > > > 0, > > > IDK > > > what the max is, so the argument for my stuff is S0 500 (or > > > whatever > > > speed you want to assign to the first spindle.) > > > > > > However I suspect something else is aglay besides that, so I'll > > > leave > > > it > > > to the experts. I did see you're on buster, but not what > > > architecture. > > > > > > Cheers, Gene Heskett. > > From a quick look, in your .ini, your geometry line is xyz, 3 > > axises, but > you then define xyzab, 5 axises later, and the .hal is missing the A > and > B stuffs. Its a bit short for a hal file too as many of the "net" > statements don't have enough arguments. > > A net statement should have > > net name-of-net <= src => target [target] [target] > one src, and as many targets as you need > and then later in the file if needed, you can: > net same-name-as-above => target target > for additional fanout if needed. > You can also do the second form in the postgui if needed if the > target > doesn't exist until the gui is running. > > My stuff is a bit like topsey, it grew and grew from hand added > stuff, > and even my simplest lathe's hal file is 600 lines including > comments, > with some approaching 1000 LOC but have line after line of comments > so I > don't forget what I was doing 3 years later. Pleading guilty to being > an > old fart who does not well remember what he did 3 years ago. At 87 > the > wet ram does not refresh as well as it did at 47. :( > > The other thing I note is that you are using gedit as the editor, > and > that may explain the short hal file. gedit likes to play 42 pickup > with > your stuff whenthe deck has 52 cards, please uninstall gedit, and > install/use geany which doesn't have that bug. gedit looks nice, but > it > will eat your lunch /and/ dinner fixing its faulty saves, get rid of > it, > with prejudice. rm it on sight. >
The two config files .ini and .hal are generated by stepconf I'm actually using mousepad and nano as editors. > Cheers, Gene Heskett. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
