On Fri, 2022-01-28 at 09:36 -0500, gene heskett wrote: > On Friday, January 28, 2022 9:22:12 AM EST Valerio Bellizzomi wrote: > > On Fri, 2022-01-28 at 08:27 -0500, gene heskett wrote: > > > On Friday, January 28, 2022 5:13:33 AM EST Valerio Bellizzomi > > > wrote: > > > > Attached are my .ini and .hal files. > > > > Can you tell me what is missing there? > > > > > > > > On Thu, 2022-01-27 at 12:39 -0500, gene heskett wrote: > > > > > On Thursday, January 27, 2022 11:49:17 AM EST Valerio > > > > > Bellizzomi > > > > > > > > > > wrote: > > > > > > Do I have to somehow convert my configurations for master ? > > > > > > > > > > IDK about your axis gui errors, but one thing I note is that > > > > > you > > > > > don't > > > > > have a numerical spindle number. master had grown the ability > > > > > to > > > > > control > > > > > more than one spindle some time back, and the S argument now > > > > > expects > > > > > a > > > > > following number before the speed of the numerical assignment > > > > > of > > > > > the > > > > > spindle number. All my machines only have one, they start at > > > > > base > > > > > 0, > > > > > IDK > > > > > what the max is, so the argument for my stuff is S0 500 (or > > > > > whatever > > > > > speed you want to assign to the first spindle.) > > > > > > > > > > However I suspect something else is aglay besides that, so > > > > > I'll > > > > > leave > > > > > it > > > > > to the experts. I did see you're on buster, but not what > > > > > architecture. > > > > > > > > > > Cheers, Gene Heskett. > > > > > > > > From a quick look, in your .ini, your geometry line is xyz, 3 > > > > axises, but > > > > > > you then define xyzab, 5 axises later, and the .hal is missing > > > the A > > > and > > > B stuffs. Its a bit short for a hal file too as many of the "net" > > > statements don't have enough arguments. > > > > > > A net statement should have > > > > > > net name-of-net <= src => target [target] [target] > > > one src, and as many targets as you need > > > and then later in the file if needed, you can: > > > net same-name-as-above => target target > > > for additional fanout if needed. > > > You can also do the second form in the postgui if needed if the > > > target > > > doesn't exist until the gui is running. > > > > > > My stuff is a bit like topsey, it grew and grew from hand added > > > stuff, > > > and even my simplest lathe's hal file is 600 lines including > > > comments, > > > with some approaching 1000 LOC but have line after line of > > > comments > > > so I > > > don't forget what I was doing 3 years later. Pleading guilty to > > > being > > > an > > > old fart who does not well remember what he did 3 years ago. At > > > 87 > > > the > > > wet ram does not refresh as well as it did at 47. :( > > > > > > The other thing I note is that you are using gedit as the editor, > > > and > > > that may explain the short hal file. gedit likes to play 42 > > > pickup > > > with > > > your stuff whenthe deck has 52 cards, please uninstall gedit, and > > > install/use geany which doesn't have that bug. gedit looks nice, > > > but > > > it > > > will eat your lunch /and/ dinner fixing its faulty saves, get rid > > > of > > > it, > > > with prejudice. rm it on sight. > > > > The two config files .ini and .hal are generated by stepconf > > > > I'm actually using mousepad and nano as editors. > > Mousepad I haven't tried, nano has always Just Worked.
ok. As I have saved all the parameters, I am going to redo the configuration, but I don't remember if I must use stepconf or pncconf. > > > > Cheers, Gene Heskett. > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > . > > Cheers, Gene Heskett. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users