On Fri, 28 Jan 2022, John Figie wrote:
Date: Fri, 28 Jan 2022 17:28:19 -0600
From: John Figie <zephyr9...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] mesa 7i80 configuration
OK
So I don't see any documentation for PktUART and it would require a custom
bit file. So that is something maybe I could add later in a custom bit file?
Sure
In the meantime I just need something that actually works that has 3 pwm
outputs and 3 encoder inputs. So can you suggest a bit file that I can use
as is and may also be a starting point for a custom file that adds 3 UARTS?
Any of the SVST bitfiles should work
regards,
John
On Fri, Jan 28, 2022, 3:48 PM Peter C. Wallace <p...@mesanet.com> wrote:
halrun I get a different error
hm2/hm2_7i80.0: inconsistent Module Descriptor for UART Transmit Channel,
not loading driver.
Thats probably because that was built with a batch file and theres a
source code
tweek needed for the UART module because it uses a differeent register
stride
For this and other reasons, I would suggest not using the UART and using
the
PktUART instead. This wil likely require a custom bitfile
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
