Awesome thanks On Sat, 26 Feb 2022, 16:27 cogoman via Emc-users, < emc-users@lists.sourceforge.net> wrote:
> I have found that the "Magic Pixie Dust" for a damp shop comes in a > spray can called Caig deoxit. The trick is pairing a contact cleaning > solution with an appropriate oil that seals the contacts so that oxygen > can't get into the connection. > > A church building is a great place for humidity related failures. Warm > on Sunday morning and Wednesday evening, cool and damp the rest of the > time. We have a 6 -DVD duplicator with a hard drive inside. After > about a year 2 of the DVD drives were acting up, and if left on for > about a half an hour, the OS (probably DOS) would lock up and need to be > power cycled. > > I sprayed every connector I could get apart (mostly SATA), and it came > back to life, and has been working well for many years since. > > I even tried it on a processor socket to see if the oil would mess up > signal integrity and it didn't, so I think the oil has a dielectric > coefficient near that of air. > > > On 2/10/22 11:19, Les Newell wrote: > > The version running a 4 core GX-415 processor should be fine for > > LinuxCNC. I use Wyse 5020 thin clients on my lathe and router, which > > use the same SOC. The 2 core version is a bit slow if you are using it > > with Ethernet FPGA cards. I used one on my lathe for a couple of years > > and it occasionally popped up a latency warning, though the machine > > appeared to run fine. > > > > I have to admit I'm a big fan of thin clients. My workshop is pretty > > damp and when I used desktop based PCs I probably averaged about 1 > > failure every year or so. Since swapping to thin clients about 5 years > > ago I have had one failure and that was down to my carelessness, > > rather than a spontaneous failure. > > > > Les > > > > > > On 10/02/2022 00:01, andrew beck wrote: > >> hey everyone > >> > >> just wondering who has used the thin client computers > >> i am looking for a fanless pc that i can buy in oceania > >> > >> https://www.youtube.com/watch?v=tVXn_fEbDTs > >> > >> _______________________________________________ > >> Emc-users mailing list > >> Emc-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
