Date: Mon, 25 Apr 2022 10:40:02 -0500
From: Earl Weaver<weaverst...@frontier.com> To:emc-users@lists.sourceforge.net Subject: Re: [Emc-users] Press Brake Gui, was: Re: Variables for instantaneous transit vector, from python? Message-ID:<956e40f7-92a0-34ba-b8fe-41248738c...@frontier.com> Content-Type: text/plain; charset=UTF-8; format=flowed-Ted, ?Just to comment on the pressbrake setup
Not meaning to confuse from the thread being hijacked, but since there appears interest, I have also posted up the source project for my press brake iteration on the form (I don't hang out there too often), but your are welcome to it - all disclaimers apply: https://forum.linuxcnc.org/show-your-stuff/45716-vertical-press-brake-interface-and-comp
(On a side note from my original posting for this, I was able to get my sphere-4points functions working as well as vector capture to determine contact direction - and although it doesn't really have much affect at the thou level (0.001") - it has shown to be a BIG difference when you hit sub tenths/micron. I'll be stealing the Reneshaw TP6 unit from work and putting it on my CMM to cross-test, but with manufacturing tolerances what they are, having more corrective values available is definitely worth it. Might be a reason why opening the "Advanced" tab in MCosmos shows over 200 corrective touch point calibration options...it's a huge matrix.)
Regards, Ted. -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
