Not having seen the press brake I'm curious about the need for back gauge up/down setting. Why would a press brake even have this?
Is it because the bent section behind the press may be up at an angle and therefore miss the back gauge? If so, how much movement is there in the up/down direction. Inquiring minds... John > -----Original Message----- > From: Ted [mailto:laser...@gmail.com] > Sent: April-26-22 7:47 AM > To: emc-users@lists.sourceforge.net > Subject: [Emc-users] Press Brake Gui, was: Re: Variables for, instantaneous > transit vector, from python? > > Date: Mon, 25 Apr 2022 10:40:02 -0500 > > From: Earl Weaver<weaverst...@frontier.com> > > To:emc-users@lists.sourceforge.net > > Subject: Re: [Emc-users] Press Brake Gui, was: Re: Variables for > > instantaneous transit vector, from python? > > Message-ID:<956e40f7-92a0-34ba-b8fe-41248738c...@frontier.com> > > Content-Type: text/plain; charset=UTF-8; format=flowed > > > > -Ted, > > ?Just to comment on the pressbrake setup > > Not meaning to confuse from the thread being hijacked, but since there > appears interest, I have also posted up the source project for my press > brake iteration on the form (I don't hang out there too often), but your > are welcome to it - all disclaimers apply: > https://forum.linuxcnc.org/show-your-stuff/45716-vertical-press-brake-interface-and-comp > > (On a side note from my original posting for this, I was able to get my > sphere-4points functions working as well as vector capture to determine > contact direction - and although it doesn't really have much affect at > the thou level (0.001") - it has shown to be a BIG difference when you > hit sub tenths/micron. I'll be stealing the Reneshaw TP6 unit from work > and putting it on my CMM to cross-test, but with manufacturing > tolerances what they are, having more corrective values available is > definitely worth it. Might be a reason why opening the "Advanced" tab in > MCosmos shows over 200 corrective touch point calibration options...it's > a huge matrix.) > > Regards, > > Ted. > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
