On Tuesday, 31 May 2022 18:44:31 EDT andrew beck wrote: > hey guys > > just dropping a link here for anyone that needs to get up a lube pump > on linuxcnc > > I have it now with a resetting timer that has a 1sec pulse that makes a > counter count up to a value and then turn on a output > > it remembers the accumulated value or length of time the timer has been > off for, while machine is moving and then turns pump on for 10 secs or > so > > just thought i would put in the effort to make this easy for the next > guy and allow you to save on lube pump wastage. > > i just sat down and fixed this as my oil has just run out and i need to > buy some more lol > > and if everyone has a better idea please let me know and feel free to > post it up on the forum post Below > > Regards > > Andrew > > https://forum.linuxcnc.org/show-your-stuff/46058-classic-ladder-lube-pu > mp-that-only-runs-while-machine-is-moving#244315
Thank you Andrew, its on my todo list. > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > . Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
