Hi Peter and thanks for the quick answer. I just did it all again but this time I didn't mount on the thread the hm2_7i95.0.read-request and it's working now.
I guess that was the problem. El mié., 27 de julio de 2022 17:21, Peter C. Wallace <p...@mesanet.com> escribió: > On Wed, 27 Jul 2022, Leonardo Marsaglia wrote: > > > Date: Wed, 27 Jul 2022 17:10:30 -0300 > > From: Leonardo Marsaglia <ldmarsag...@gmail.com> > > Reply-To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > > > Subject: [Emc-users] 7i95 + 7i70 + 7i72 issue > > > > Hi guys, probably a silly problem but I can't find the solution yet. > > > > I'm just testing a 7i95 config calling it by halcmd and the config loads > > ok, the boars are all showing up but the 7i70 and 7i72 are showing the > red > > led instead of the green blinking led. They show up in halcmd but I can't > > get them to work. > > > > I really don't have a clue about what's going on because this worked a > > month ago. > > > > I would be thankful if you can help me with this. > > > > Thanks as always! > > > > Leonardo > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > Did you setup and start a thread with the hm2 read and write commands > added? > > Starting the driver will setup and interrogate the SSerial remotes, > reading the remotes setup information and creating hal pins/parameters, > but they will not have the periodic communications that blink the green > lights unless a thread that does the hm2 reads and writes is running. > > > Peter Wallace > Mesa Electronics > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
