I didn't see anything on the Acorn that suggests it supports a Charge Pump to protect the system if the PC goes bye-bye.
For that matter, small survey question here, how many people running LinuxCNC are actually using a Charge Pump for safety? John > -----Original Message----- > From: andy pugh [mailto:bodge...@gmail.com] > Sent: September-08-22 1:08 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Acorn CNC > > On Thu, 8 Sept 2022 at 07:43, <marcus.bow...@visible.eclipse.co.uk> wrote: > > > Would a Tormach with PathPilot allow me to drop into programming mode > > easily? > > I would expect so, the G-code is exactly the same (other than, > possibly, different handing of T in lathe mode) > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > � George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
