Amazon has a turn-keyCNC controller for $480.  This includes the whole kit,
computer, FPGA, screen BoB and all except for power supply and the motors.


Question:  Is this based on LCNC?   Seem like it might be   Below is a
quote from their web page, I added the bold face.

>
>    - The DDCS Expert is a *5 axis motion controller for open or close
>    stepper and servo systems* with 7" full color display screen. The
>    highest output pulse per axis is 1MHz. The users can self-define the
>    functional keys. This controller supports multiple spindle mode, support
>    straight Tool Magazine, gantry type Magazine, disk type magazine. The
>    Operation system interface even though very comprehensive, can be learned
>    in very short time.
>
>
>    - The DDCS Expert numerical control system *adopts the ARM+FPGA design
>    framework*. ARM controls the human-computer interface and code
>    analysis and the FPGA provides the underlying algorithms and creates the
>    control pulse. This guarantees reliable control and easy operation.
>
>
>    - *The internal operating system is Linux based.*
>
>
Product: amazon.com/Axis-Controller-Handwheel-MPG-Emergency/dp/B09WLDKW53
<https://www.amazon.com/Axis-Controller-Handwheel-MPG-Emergency/dp/B09WLDKW53?ref_=ast_sto_dp&th=1>
User Manual:
/nvcnc.net/pdf/DDCS%20Expert%20User's%20Manual%20V1%20(Part1)-nvcnc.pdf
<https://nvcnc.net/pdf/DDCS%20Expert%20User's%20Manual%20V1%20(Part1)-nvcnc.pdf>



-- 

Chris Albertson
Redondo Beach, California

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to