The output suggests that you upgraded from LINUXCNC 2.6.32-122 to LINUXCNC - 2.7.14 about five years ago and now it is trying to find a realtime kernel module that did not exist in the earlier install Do you leave this controller running all the time? There is some discussion about this in the 2.7.14 getting started files that might help. Is this a motherboard parport or an add in?
> I could use some help here. Machine was fine yesterday, power outage last > night took > the machine out. I was never that good with the backend stuff and 8 years > or > so later > I'm stuck trying to remember what I didn't know. Any help would be > apprecieated. > > Cinci12mo@cinci12mo:~$ linuxcnc > LINUXCNC - 2.7.14 > Machine configuration directory is '/home/cinci12mo/linuxcnc/configs' > Machine configuration file is 'MEANGREEN.ini' > Starting LinuxCNC... > (time=1674826242.755098,pid=6155): Registering server on TCP port 5005. > (time=1674826242.755202,pid=6155): running server for TCP port 5005 > (connection_socket = 3). > iocontrol: machine: '12MO' version 'unknown' > Found file(REL): ./12mogmoccapymaster.hal > ./12mogmoccapymaster.hal:3: Can't find module 'probe_parport' in > /usr/realtime-2.6.32-122-rtai/modules/linuxcnc > Shutting down and cleaning up LinuxCNC... > > > Jeff Johnson > john...@superiorroll.com > Superior Roll & Turning > 734-279-1831 > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
