This config uses a 5i23-
Yes we left it up last night-We usually do, but not always.
------------------------------
Message: 2
Date: Fri, 27 Jan 2023 11:29:30 -0600
From: "Ray Henry" <rehe...@fast-air.net>
To: "Enhanced Machine Controller \(EMC\)"
<emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] Not Starting
Message-ID:
<aaef97132469cb79113f6c60813c772d.squir...@mail.fast-air.net>
Content-Type: text/plain;charset=iso-8859-1
The output suggests that you upgraded from LINUXCNC 2.6.32-122 to LINUXCNC
- 2.7.14 about five years ago and now it is trying to find a realtime kernel
module that did not exist in the earlier install Do you leave this
controller running all the time? There is some discussion about this in the
2.7.14 getting started files that might help. Is this a motherboard parport
or an add in?
> I could use some help here. Machine was fine yesterday, power outage
> last night took the machine out. I was never that good with the
> backend stuff and 8 years or so later I'm stuck trying to remember
> what I didn't know. Any help would be apprecieated.
>
> Cinci12mo@cinci12mo:~$ linuxcnc
> LINUXCNC - 2.7.14
> Machine configuration directory is '/home/cinci12mo/linuxcnc/configs'
> Machine configuration file is 'MEANGREEN.ini'
> Starting LinuxCNC...
> (time=1674826242.755098,pid=6155): Registering server on TCP port 5005.
> (time=1674826242.755202,pid=6155): running server for TCP port 5005
> (connection_socket = 3).
> iocontrol: machine: '12MO' version 'unknown'
> Found file(REL): ./12mogmoccapymaster.hal
> ./12mogmoccapymaster.hal:3: Can't find module 'probe_parport' in
> /usr/realtime-2.6.32-122-rtai/modules/linuxcnc
> Shutting down and cleaning up LinuxCNC...
>
>
> Jeff Johnson
> john...@superiorroll.com
> Superior Roll & Turning
> 734-279-1831
>
>
>
******************************************
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
