Probably, but we will need a better explanation of exactly what machine responses you want to what machine inputs, before we could give a detonate yes or instructions how to do so.
Are you asking for the machine to automatically home all joints when the machine power/enable button is pressed? Are you asking for a reset button that returns the machine to a ready position after an incident or interruption of a program? Something else entirely? Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: Alan Thomason via Emc-users <emc-users@lists.sourceforge.net> Sent: Monday, December 18, 2023 12:01 PM To: emc-users@lists.sourceforge.net Cc: Alan Thomason <alanmthoma...@icloud.com> Subject: [Emc-users] Starting up in Machine ON [EXTERNAL EMAIL] Be sure links are safe. Hi There... We have a positioning machine that uses linuxcnc that we want to better automate the restart procedure. Is it possible to script in the initial file for the system to switch to Machine ON (as long as there are no active limit switches). This machine is inaccessible to humans without turning off power, so there is no safety concern. Thanks so much, Alan Sent from my iPhone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
