Steel wool, Deep Creep penetrating oil, and a lot of "elbow grease". Then once you have the rust off or smoothed you'll have to decide if the rails are too rough to use.
On Monday, March 11, 2024 at 01:47:31 AM MDT, Viesturs Lācis <viesturs.la...@gmail.com> wrote: 2) my main problem is the rust on linear rails. what is recommended procedure to treat this? Here is a picture that show the extent of the issue: https://pasteboard.co/C1EAn0w5t8KT.jpg What I did is brushing it with a piece of steel wool moisted with oil. I am not sure that it is sufficient so I would appreciate any tips on how to treat them. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
