Oh and I made a mistake. The pst file I have is for a Fadal. And a reference to that systems G-Code is here: https://www.helmancnc.com/fadal-g-codes-m-codes-fixed-subroutines/ Now I know what an 'E' does and also the 84.1 and 84.2.
> -----Original Message----- > From: John Dammeyer [mailto:jo...@autoartisans.com] > Sent: March 27, 2024 10:03 PM > To: 'Enhanced Machine Controller (EMC)' > Subject: Re: [Emc-users] GibbsCAM machine .pst file. > > Thanks for the feedback. I did find a LinuxCnc-Mill-jk.pM3 file which is > used > with the PostHaste Plugin. It produced code that didn't cause LCNC to > complain. > However I can't figure out how to actually create a .pst file. I have about > 28 > days left on my GibbsCAM evaluation so perhaps I'll reach out to them. > John > > > -----Original Message----- > > From: Phill Carter via Emc-users [mailto:emc-users@lists.sourceforge.net] > > Sent: March 27, 2024 9:32 PM > > To: linuxcnc-users > > Cc: Phill Carter > > Subject: Re: [Emc-users] GibbsCAM machine .pst file. > > > > If you cannot get a post processor for LinuxCNC then another option would > > be to run the Fanuc g-code file through a Python filter program to > automate > > any required changes: > > > > <http://linuxcnc.org/docs/2.9/html/gui/filter-programs.html> > > > > > > > > > On 28 Mar 2024, at 2:01?pm, John Dammeyer <jo...@autoartisans.com> > > wrote: > > > > > > Does anyone have a generic GibbsCAM .pst file for LinuxCNC? > > > > > > I've generated G-Code for a FANUC but comments start with a '*' and it > has > > > rigid tapping using G84.1 and G84.2. I replaced those with G84 just to > > > see > > > if it would load. Had to add an M3 in front of the S300. > > > > > > There are probably other issues too that I haven't found yet. > > > > > > Thanks > > > > > > John > > > > > > > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
