About to say, what you were describing didn't sound like a standard Fanuc g-code to me.
You might also try looking at the output for other machine brands that you know use Fanuc controlers. Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: John Dammeyer <jo...@autoartisans.com> Sent: Thursday, March 28, 2024 1:35 AM To: 'Enhanced Machine Controller (EMC)' <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] GibbsCAM machine .pst file. [EXTERNAL EMAIL] Be sure links are safe. Oh and I made a mistake. The pst file I have is for a Fadal. And a reference to that systems G-Code is here: https://www.helmancnc.com/fadal-g-codes-m-codes-fixed-subroutines/ Now I know what an 'E' does and also the 84.1 and 84.2. > -----Original Message----- > From: John Dammeyer [mailto:jo...@autoartisans.com] > Sent: March 27, 2024 10:03 PM > To: 'Enhanced Machine Controller (EMC)' > Subject: Re: [Emc-users] GibbsCAM machine .pst file. > > Thanks for the feedback. I did find a LinuxCnc-Mill-jk.pM3 file which is > used > with the PostHaste Plugin. It produced code that didn't cause LCNC to > complain. > However I can't figure out how to actually create a .pst file. I have > about 28 days left on my GibbsCAM evaluation so perhaps I'll reach out to > them. > John > > > -----Original Message----- > > From: Phill Carter via Emc-users > > [mailto:emc-users@lists.sourceforge.net] > > Sent: March 27, 2024 9:32 PM > > To: linuxcnc-users > > Cc: Phill Carter > > Subject: Re: [Emc-users] GibbsCAM machine .pst file. > > > > If you cannot get a post processor for LinuxCNC then another option > > would be to run the Fanuc g-code file through a Python filter > > program to > automate > > any required changes: > > > > <http://li/ > > nuxcnc.org%2Fdocs%2F2.9%2Fhtml%2Fgui%2Ffilter-programs.html&data=05% > > 7C02%7Ctoddz%40pgrahamdunn.com%7C413fe5fe7c194f7ce11908dc4ee90747%7C > > 5758544c573f47cebee96c3e0806fb43%7C0%7C0%7C638472009975876775%7CUnkn > > own%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW > > wiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=4lA742cFoRkcVglIcsx4rcZezgEyvu6e > > MEbpcaVhH5U%3D&reserved=0> > > > > > > > > > On 28 Mar 2024, at 2:01?pm, John Dammeyer <jo...@autoartisans.com> > > wrote: > > > > > > Does anyone have a generic GibbsCAM .pst file for LinuxCNC? > > > > > > I've generated G-Code for a FANUC but comments start with a '*' > > > and it > has > > > rigid tapping using G84.1 and G84.2. I replaced those with G84 > > > just to see if it would load. Had to add an M3 in front of the S300. > > > > > > There are probably other issues too that I haven't found yet. > > > > > > Thanks > > > > > > John > > > > > > > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2F > > > lists.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=05%7C02% > > > 7Ctoddz%40pgrahamdunn.com%7C413fe5fe7c194f7ce11908dc4ee90747%7C575 > > > 8544c573f47cebee96c3e0806fb43%7C0%7C0%7C638472009975882137%7CUnkno > > > wn%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha > > > WwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=8iRKFjv4iAEJO3QqD0YQSEJjqQ5gR > > > YdXiw2W164%2FDhw%3D&reserved=0 > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://li/ > > sts.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=05%7C02%7Cto > > ddz%40pgrahamdunn.com%7C413fe5fe7c194f7ce11908dc4ee90747%7C5758544c5 > > 73f47cebee96c3e0806fb43%7C0%7C0%7C638472009975887333%7CUnknown%7CTWF > > pbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI > > 6Mn0%3D%7C0%7C%7C%7C&sdata=PAUbVCzAFe6EBeFmuYSTnKgde9jqaVoIUyGfzby1L > > 4E%3D&reserved=0 > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://list/ > s.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=05%7C02%7Ctoddz% > 40pgrahamdunn.com%7C413fe5fe7c194f7ce11908dc4ee90747%7C5758544c573f47c > ebee96c3e0806fb43%7C0%7C0%7C638472009975892478%7CUnknown%7CTWFpbGZsb3d > 8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C > 0%7C%7C%7C&sdata=6mM6XoeGRlkIzVeVcKB9WTu7Vox%2FPI3XhBHg4jg3Xkw%3D&rese > rved=0 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
