I am working at trying to set up a 7i84 io card on a machine that I am refitting and I'm having some trouble with it.
The outputs all seem to be working correctly, but I can only seem to get half of the inputs to work. I have 24v DC to all of the Vin terminals. The inputs on TB2 seem to all be ok. But the ones on TB3 are not. In Hal, the 1st 8 inputs (0-7) all read false (no mater what I connect to them, and the 2nd 8 all read true (8-15) no mater what is connected to them. The 7i84 is connected to the SS port on a 7i85S that is connected to a 5i25. Any ideas what I might have messed up? My best guess is that while I was wiring up and testing limit switches I may have had a stray loose wire with 24v touch against some place it shouldn't have. (In hind sight, I probably should have turned off the 24v while I was working on that.) Todd Zuercher P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php> 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
