On 4/9/24 12:50, John Dammeyer wrote:
Hi all,
Will the Pi5 be any better for LinuxCNC than the Pi4 with a MESA Ethernet
Controller or is the Pi4 already more than what LinuxCNC requires?
John
I am running a late 1940's Sheldon 11x54 first with an rpi3b, but its
tongue was dragging on the floor, and I've not seen any evidence of that
since switching to an rpi4b not long after it came out.
I did put many of the "manual functions" in a separate 200 hz thread
while it was still running of the 3b, and have not taken any of it out
since swapping in the rpi4. My .hal file is available, just ask, for a
7i90HD & a triplet of 7i42TA's to anyone who asks. It uses a Spinx1 to
talk to the vfd. This leaves the ethernet free to tend to the usual
network stuff. Like updating the os or even browsing you-tube.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
