No, they are not. The old pc was running Ubuntu 10.04. (Because that was the last Linuxcnc distro that seemed work with this old pc and it’s ISA IO card.) The new PC is running Debian 12 (installed using an ordinary Debian net install iso).
The groups the user belongs to on the PC are “adm, dialout, cdrom, plugdev, lpadmin, admin, and sambashare”. The groups for the new PC are “cdrom, floppy, sudo, audio, dip, video, plugdev, users, netdev, lpadmin, and scanner” So, I’m not sure, to my unskilled eye, it would seem that “dialout” might be the most logical possible permission deficiency, but I’m not sure if “dip” might be an equivalent replacement for that. Todd Zuercher P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php> 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 From: andy pugh <bodge...@gmail.com> Sent: Wednesday, May 08, 2024 4:18 AM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Cc: Todd Zuercher <to...@pgrahamdunn.com> Subject: Re: [Emc-users] Mb2hal 2.9? [EXTERNAL EMAIL] Be sure links are safe. On Wed, 8 May 2024 at 02:15, Todd Zuercher via Emc-users <emc-users@lists.sourceforge.net<mailto:emc-users@lists.sourceforge.net>> wrote: It was already set to 3. What is your MB2HAL load line? What does lsusb call the dongle? Are the two PCs in question running the same version of Linux? -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
