Get a temperature differential of 100C between the two parts (outer hotter) to aid in placement.
For work we fit large bronze bushings in crusher components. Pack in dry ice for about 2-4 hrs for a 50kg bushing. Slide into inner bore quickly. In cold weather we will also warm up the outer assembly to insure install room prior to Fitting. On Tue, Jun 11, 2024 at 8:29 AM Nicklas SB Karlsson <n...@nksb.eu> wrote: > Anyone here have experience with press fitted guide bushing and pillar? > > Tried with a somewhat undersized hole so that a few tonnes of pressure is > needed for the guide bushing. Then of course > the bushing is squeezed and the pillar will not fit inside without some > force. Make hole as exact as possible then this > is not a problem but there is a risk bushing will get lose. > > > Regards Nicklas Karlsson > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
