Hello! Thank you! I had time for a little test. I did not change anything on machine, with 5i24_16_sv12im_2x7i48 rawcounts on encoder channels 6, 7 and 10 changed as I moved motors. I only did - -write and also - -verify to be sure. So now I would expect channels 0, 1 and 4 to catch some rawcounts, but none of the channels show a change. Am I missing something?
Viesturs Peter Wallace <p...@mesanet.com> (šajā datumā: piektd., 2025. g. 20. jūn. 23:43) rakstīja: > > >No thanks, I have 2x 8i20 as well as 2x 7i71 and 2x7i70 already > >connected to 7i44 and now 7i84 will join the party. Although there is > >VFD that might be controlled via Modbus I am sure that I do not want > >to start learning that at the moment so we will skip Modbus at the > >moment. > > > >Viesturs > > > http://freeby.mesanet.com/5i24_16_svss6_8_7i48d.zip > > 7I48 on P3 7I44 on P2 for 5I24-26 or 6I24-16 > > > Peter Wallace > Mesa Electronics > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
