On 6/22/25 12:45, Viesturs Lācis wrote:
sestd., 2025. g. 21. jūn., plkst. 17:31 — lietotājs Peter Wallace
(<p...@mesanet.com>) rakstīja:
Not sure, looks right to me, 7I48 on P3, 7I44 on P4
With just the 5I24, (no flat cables connected) what does
sudo mesaflash --device 5i24 --rpo 0x1000
sudo mesaflash --device 5i24 --rpo 0x1004
sudo mesaflash --device 5i24 --rpo 0x1008
report?
Hello!
sudo mesaflash --device 5i24 --rpo 0x1000 return 00FFCD7F
sudo mesaflash --device 5i24 --rpo 0x1004 return 00FFFFFF
sudo mesaflash --device 5i24 --rpo 0x1008 return 00FFFFFF
Just wanted to thank you for your help, all is good now, encoder
channels worked today. Based on command history in terminal it seems
that I skipped "reload" command as I definitely did not reboot PC
between flashing the firmware and the quick test.
I will plug everything back together and try to move whole machine to
check if all analog outputs are good as well.
Viesturs
I'm likely just noise here, but should point out that my own history
with flat (IDC) cables has not been spotless. I even considered
constructing some plugs to serve as an all-in-one ringing jig for the 25
pinners, but never got a round tuit to actually do it. I now have
material to make new cables, easier done.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
